PAINT-REMOVER (RXSOL-18-1013-20)

Introduction:- Exciting product treated for the really tough , Paints cleaning problems faced in the proper maintences of Industrials & Institutional physical plants.
Fields:-To  remove Paint, Varnish, Lacquer, Baked, Enamel, Shellac,  and  EPOXY  in Shipping Industries, Workshop, Paints Shop,Garages from all metallic surfaces.
Note:-This  Paint–Remover (RXSOL-18-1013-20) particularly  used  in aircraft- industry   because   of   its   non-reactivity   with  Aluminium , Copper , Brass and their Alloys .
Composition:- RXSOL-18-1013-20 is a  special blend of  advanced Organic corrosion protection components with various organic solvents & penetrating agents. RXSOL-18-1013-20 functions via a unique dual mechanism the penetrating agent reacts with paints components whilst the organic components reacts with metals  to form protection film.
Applications, Dossage & Control:-
Dip-Cleaning:- Small parts maybe dipped in an open bucket or tank containing RXSOL-18-1013-20 removed  and either  wiped dry with a rag or blown dry air. Agitation will  facilitate cleaning,but violent agitation such as with air should be avoided since this will increases loss of RXSOL-18-1013-20 evaporation. After use,the cleaning tank should be covered or the solution put into a suitable container for reuse. Solvent resistant gloves should be worn during the dip operation.
Wiping/Brushing:-Large components may be wiped down with rags,sponges or brushes soaked in RXSOL-18-1013-20. Synthetics Sponges & brushes should be checked for compa-tibility with RXSOL-18-1013-20 prior to use.Adequate ventilation shouldbe provided when this method is used & solvent resistant gloves & protection clothing should be worn.
Spray-Cleaning:-Generator & large electric motors can be cleaned effectively by the spray method Any  excess cleaner which runs off  may be  collected  for re-use. A-course spray should  be used to reduce evaporation  and  loss of RXSOL-18-1013-20. When this method is used adequate ventilation should be provided. If there is any danger of splashing a face shield or goggles should be worn
Advantages:-Reduced maintenances time.Does not attack Steel, Copper, Aluminium, Other alloys.

Product Properties:-

Characteristics:-Easy to apply & simple to control.Exhibits excellent ;paints cleaning properties. Non toxic to the environment.100% active matter.Dries completely. Protects all common metals from corrosive attack. Reduce down time & maintenances costs. Can be used on all metals & most painted surface to remove paints.
General Remarks:-Do not store RXSOL-18-1013-20 near heating equipment.
First Aid & Storage:-Contact with skin can cause serous chemicals burns .Avoid  contact with skin & eyes.Wear PVC gloves while handling. Do not take internally. Spl-ashes of  the  product  or  its  solutions  on  the  skin  or  clothing  should washed immediately  with  cupious  amount  of  water .  If  the  eyes  are  affected  should be washed with water for at least 15 minutes  and  seek medicals attention  sought immediately.
                        

                                                   **Keep drums tightly closed when not in use**